Calculate the exact weight of your integrated fasteners instantly. Our Hex Flange Nut Weight Calculator is designed specifically for six-sided nuts with a built-in washer face (DIN 6923 / ISO 4161 standards).
Whether for automotive assembly or sheet metal fabrication, precision matters. Flange nuts distribute clamping loads over a wider area, eliminating the need for separate washers and speeding up installation. Get accurate weight data for your bulk orders in seconds to streamline procurement.
Supported Size Range:
- ✔ Diameters: M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M20, up to M24.
- ✔ Design: Standard Flange Base (Prevents surface damage and pull-through on oversized holes).
- ✔ Key Feature: Built-in Washer (Replaces the nut-and-washer combo for faster assembly).
Select product to view image
Hex Flange Nut Specification & Weight Reference (Stainless Steel 304)
| Thread Size | Pitch (mm) | Nut Height (mm) | Wrench Size (mm) | Single Weight (g) | Weight per 1000 pcs (kg) |
|---|---|---|---|---|---|
| M3 | 0.50 | 3.50 | 5.5 | 0.715 | 0.72 |
| M4 | 0.70 | 4.60 | 7.0 | 1.22 | 1.22 |
| M5 | 0.80 | 5.00 | 8.0 | 1.63 | 1.63 |
| M6 | 1.00 | 6.00 | 10.0 | 2.89 | 2.89 |
| M8 | 1.25 | 8.00 | 13.0 | 6.12 | 6.12 |
| M10 | 1.50 | 10.00 | 15.0 | 10.74 | 10.74 |
| M12 | 1.75 | 12.00 | 18.0 | 18.79 | 18.79 |
| M16 | 2.00 | 16.00 | 24.0 | 43.43 | 43.43 |
| M20 | 2.50 | 20.00 | 30.0 | 84.80 | 84.80 |
| M24 | 3.00 | 24.00 | 36.0 | 157.00 | 157.00 |
Applicable Standards: DIN 6923, ISO 4161, DIN EN 1661, ANSI/ASME B 18.2.4.4M, NF E 25-406
Note: Weights shown are for Stainless Steel 304 only. Use the calculator above for other materials (Stainless Steel, Brass, Titanium, etc.) and additional specifications.
